Wolfgang Puck BIBC2020 Betriebsanleitung PDF herunterladen (Seite 6)

9 10

Helpful Hints

• The hand blender can be used in hot liquids. Always use care when

using in hot liquids. To avoid splashing when using the hand blender

in a saucepan, insert the hand blender into the pan first, set the

speed dial to “1”, and then press the Pulse Button. Slowly increase

the speed to your desired setting. Caution: Do not tilt or lift the

Immersion Blender out of the pan while the motor is running, as a

serious burn or injury can occur from food splatter.

• To puree foods, a certain amount of liquid is needed.

Add cooking liquid, broth, juice, milk, or cream, until desired

consistency is reached.

• For thorough blending, move blade up and down in mixture until smooth.

• You will achieve better mixing results if you use deep, tall containers.

• For easy cleanup, unplug blender and rinse under running water

immediately after using.

• Place liquid ingredients into the beaker first unless recipe specifically

states otherwise.

• Before turning the appliance on, immerse the hand blender attachment

into the prepared ingredients, thus ensuring they will not spill over.

• For greater efficiency, move the appliance in small outward spiraling

circles while mixing, without touching the bottom of the beaker with

the hand blender attachment.

• The hand blender attachment cannot blend hard or fibrous ingre-

dients unless they are in less than 1/2" pieces, soft ones into 1/2 - 1"

pieces.

• Some foods require a small amount of liquid to allow them to move

freely around the blades. Soft or wetter foods require less liquid,

while dry ingredients require more liquid. Add the liquid a little at a

time until the mix gains the required consistency.

• When using the hand blender, ensure the blades are covered to avoid

splashing.

Assembly and Use

of Food Chopper Attachments

1 Ensure the Motor Base is unplugged.

2 Assemble Chopper Bowl by first placing

the Chopping Blade onto the Blade Shaft

in the Chopper Bowl. Then place food in

bowl. For best results, solid foods should

be no larger than 1/2" cubes.

3 Attach the Motor Base onto the Chopper

Lid by pressing down until you hear a click.

4 Attach Motor Base to top of Bowl Cover

by turning clockwise.

5 Plug into 120-volt 60 Hz AC only outlet.

6 Attach the assembled Motor Base with Lid

to the Chopping Bowl Cover as follows:

Line up the tab on the Cover with the

groove on the Chopper Bowl (see figure 1).

Insert cover tab into groove of Bowl and

turn clockwise until it locks in place (see

figure 2).

7 Set the speed selector to 5. Always ensure

your hand is placed firmly on the Bowl

Cover. Use a pulse action when chopping

by pressing and releasing the Pulse Button

until desired consistency.

8 Do not operate the motor continuously for

more than 15 seconds when using chopper

attachment, otherwise food will be too

finely chopped.

9 When you are finished, simply release the

Pulse Button and unplug the Motor Base.

To remove the lid, turn the Motor Base

counter clockwise and lift straight up.

10 Assembly of Nonskid Base/Cover:

The nonskid base also serves as a cover

for your chopping bowls and beaker.

Simply remove the nonskid base from the

bottom of the container and snap into

place on top for storage.

figure 1

figure 2

2020ImmBlderManual 2/19/10 4:28 PM Page 9

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Wolfgang Puck BIBC2020 Betriebsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mixer Wolfgang Puck BIBC2020